Wet areas (bathrooms)

The Austrotherm UNIPLATTE board is an ideal carrier, in new buildings and in renovations alike. It is recognisably pink, made of extruded polystyrene foam (XPS), and reinforced on both faces with a glass-fibre mesh embedded in a special mortar. It is made in Austria (Pinkafeld).

Austrotherm Uniplatte (4, 6, 10, 20, 30, 40, 50, 60, 70, 80, 100 or 120 mm thick, in 600 mm x 1300 mm or 600 mm x 2600 mm) is an ideal carrier for ceramic tiles. Very easy to cut and install, it has many uses: floors, partition walls, boxing in services, cabinets, shelves, steps and more.

UNIPLATTE products

Thickness in mm	Applications
4, 6, 10	As a levelling board in bathrooms whose walls are not tiled to full height. Old tiles are often only 4 mm or 6 mm thick; this allows new tiles to be laid on the whole wall, up to the ceiling.
12.5	Plasterboard is often used in wet areas (e.g. bathrooms). Our 12.5 mm board is then the ideal connecting board between two plasterboards, whose standard thickness is also 12.5 mm.
20, 30, 40, 50	As a structural solution for all kinds of tasks. In the bathroom: boxing in pipes, cladding furniture (shelves, cabinets, small tables etc.), partitioning services, etc.
60, 70,,80	As a structural solution for all kinds of tasks. In the bathroom: wherever high stability is needed — heavier bathroom furniture, steps, etc.
100.120	As a structural solution for all kinds of tasks. On balconies: wherever high stability is needed, e.g. free-standing partition walls.

*These boards measure 1300 mm x 600 mm. Boards with d ≥ 10 mm measure 2600 mm x 600 mm.

Simple, quick and easy

Shaping cabinets and shelves, cladding bathtubs: easy and simple with Austrotherm UNIPLATTE®

Advantages of Austrotherm UNIPLATTE

Largely insensitive to water (moisture-tight)
Many design options
Adhesive bonds excellently to the board
Very easy to cut
Light weight
Thermally insulating
Dimensionally accurate
Perfectly flat
Frost-resistant
High compressive strength
Low flammability

Uses of Austrotherm UNIPLATTE

Waterproofing works
Cladding wall and floor surfaces in dry and wet areas
Cladding walls and floors in new buildings and renovations
Building structures such as built-in cabinets, shelves etc.
Building partition walls
Boxing in pipes (services, water supply and drainage)
Covering timber floor structures

Easy to work

Austrotherm Uniplatte is cut quickly and easily with a hand saw or an ordinary utility knife.

With a suitable saw you can cut all kinds of shapes from Austrotherm Uniplatte, including round and oval ones.

Fast-setting tile adhesive is applied in dabs to the back of Austrotherm Uniplatte.

The adhesive bonds perfectly to screed or concrete. If the substrate is not load-bearing, Austrotherm Uniplatte must be fixed to it with dowels.

Insulation advisor

Describe the job — get the right boards

Tell us what you are insulating and with what. The advisor picks from Austrotherm products only and quotes our own data; the site then works out the packs.

Describe the building element and the situation
Get the element, the boards and the open questions
Calculate packs and the indicative thickness

The assistant needs JavaScript. Ask our technical support: Technical support · +381 (0)11 23 69 283 · All products

Private customers and contractors

We sell wholesale only. Our products are on sale at hundreds of building-material dealers in Serbia and Montenegro.

Find a dealer

Building-material dealers

Registered companies order directly from us — with the order form and the current price list.

Order form for dealers Price lists

UNIPLATTE products

Austrotherm UNIPLATTE

Austrotherm UNIPLATTE ugaoni elementi „L” i “U”

Austrotherm UNIPLATTE element pregradnog zida