Product family
Austrotherm UNIPLATTE
A pink XPS board, reinforced on both sides with glass-fibre mesh in a special mortar — a carrier for tiles in new builds and renovations.
The Austrotherm UNIPLATTE board is an ideal carrier, in new buildings and in renovations alike. It is recognisably pink, made of extruded polystyrene foam (XPS), and reinforced on both faces with a glass-fibre mesh embedded in a special mortar. It is made in Austria (Pinkafeld).
Austrotherm Uniplatte (4, 6, 10, 20, 30, 40, 50, 60, 70, 80, 100 or 120 mm thick, in 600 mm x 1300 mm or 600 mm x 2600 mm) is an ideal carrier for ceramic tiles. Very easy to cut and install, it has many uses: floors, partition walls, boxing in services, cabinets, shelves, steps and more.
| Thickness in mm | Applications |
|---|---|
| 4*, 6*, 10 | As a levelling board in bathrooms whose walls are not tiled to full height. Old tiles are often only 4 mm or 6 mm thick; this allows new tiles to be laid on the whole wall, up to the ceiling. |
| 12.5 | Plasterboard is often used in wet areas (e.g. bathrooms). Our 12.5 mm board is then the ideal connecting board between two plasterboards, whose standard thickness is also 12.5 mm. |
| 20, 30, 40, 50 | As a structural solution for all kinds of tasks. In the bathroom: boxing in pipes, cladding furniture (shelves, cabinets, small tables etc.), partitioning services, etc. |
| 60, 70,,80 | As a structural solution for all kinds of tasks. In the bathroom: wherever high stability is needed — heavier bathroom furniture, steps, etc. |
| 100.120 | As a structural solution for all kinds of tasks. On balconies: wherever high stability is needed, e.g. free-standing partition walls. |
*These boards measure 1300 mm x 600 mm. Boards with d ≥ 10 mm measure 2600 mm x 600 mm.
Simple, quick and easy
Shaping cabinets and shelves, cladding bathtubs: easy and simple with Austrotherm UNIPLATTE®
Advantages of Austrotherm UNIPLATTE
- Largely insensitive to water (moisture-tight)
- Many design options
- Adhesive bonds excellently to the board
- Very easy to cut
- Light weight
- Thermally insulating
- Dimensionally accurate
- Perfectly flat
- Frost-resistant
- High compressive strength
- Low flammability
Uses of Austrotherm UNIPLATTE
- Waterproofing works
- Cladding wall and floor surfaces in dry and wet areas
- Cladding walls and floors in new buildings and renovations
- Building structures such as built-in cabinets, shelves etc.
- Building partition walls
- Boxing in pipes (services, water supply and drainage)
- Covering timber floor structures
Easy to work
Austrotherm Uniplatte is cut quickly and easily with a hand saw or an ordinary utility knife.
With a suitable saw you can cut all kinds of shapes from Austrotherm Uniplatte, including round and oval ones.
Fast-setting tile adhesive is applied in dabs to the back of Austrotherm Uniplatte.
The adhesive bonds perfectly to screed or concrete. If the substrate is not load-bearing, Austrotherm Uniplatte must be fixed to it with dowels.
Private customers and contractors
We sell wholesale only. Our products are on sale at hundreds of building-material dealers in Serbia and Montenegro.
Building-material dealers
Registered companies order directly from us — with the order form and the current price list.