XPS TOP

Austrotherm Universalplatte

Thin all-purpose board of extruded polystyrene with straight edges and a smooth or rough surface

λ: 0.033 W/mK
Compressive strength: 200 kPa

Application

As a separating layer and, where needed, on basement walls when thicker insulation (more than 2 cm) is not required.

Above the foundation slab
Basement walls (smooth outside, rough inside)

Austrotherm Universalplatte

Technical data

As published by Austrotherm d.o.o. Copy the table or print it for your project file.

Cell content	air
Product colour	pink
Surface	smooth (d = 10 mm) or rough (10 mm or 20 mm)
Closed-cell content	≥ 95%
Edges	straight edges
Board size	1250mm x 600mm
Net board area	0.75m2
Thermal conductivity (λ)	0.033 W/mK
Compressive strength (at 10% deformation)	min. 200 kPa (20 t/m2)
Maximum service temperature	70º C

Austrotherm Universalplatte

Packaging

Thicknesses, board sizes, boards per pack, m² and m³ per pack and the EAN code of each item.

Packing list: Austrotherm Universalplatte boards

EAN	thickness in mm	size in mm	boards per pack	m² per pack	m³ per pack
8606025965403	10*	1250 x 600	40	30.00	0.300
8606025965410	20*	1250 x 600	20	15.00	0.300
8606025965427	20**	1250 x 600	20	15.00	0.300

* smooth surface

** rough surface

Indicative calculation

How many packs?

Packs from our own packing lists: area ÷ m² per pack, rounded up. With a target U-value the calculator shows the indicative insulation thickness d = λ × R.

Enter the area to see the number of packs.

Indicative only — the final choice and thickness are confirmed by your designer or Austrotherm technical support. The thickness estimate takes the insulation layer alone (R = 1/U) and does not check any regulation.

Find a dealer Ask technical support