Name: Austrotherm EPS A100
Brand: Austrotherm

Application

In areas with lower compressive loads on the insulation layer (e.g. under the screed of floor build-ups).

Austrotherm EPS A100

Technical data

As published by Austrotherm d.o.o. Copy the table or print it for your project file.

Cell content	air
Product standard	EN 13163
Category to EN 13163	EPS 100
Colour of the band on the pack	yellow
Edges	straight edges / stepped (rebated) edges
Board size	1000mm x 500mm
Net board area	0.50m2 / 0.4777m2
Compressive strength (at 10% deformation)	min. 100 kPa (10 t/m2)
Permitted compressive load (at 2% deformation)	20 kPa (2 t/m2)
Thermal conductivity (λ)	0.035 W/mK
Reaction to fire class	E

Austrotherm EPS A100

Packaging

Thicknesses, board sizes, boards per pack, m² and m³ per pack and the EAN code of each item.

Packing list: Austrotherm EPS A100 boards with straight edges

EAN	thickness * [mm]	size ** [mm]	boards per pack	m² per pack	m³ per pack
8606025962365	10	1000 x 500	50	25.0	0.250
8606025962372	20	1000 x 500	24	12.0	0.240
8606025962389	30	1000 x 500	16	8.0	0.240
8606025962396	40	1000 x 500	12	6.0	0.240
8606025962419	50	1000 x 500	10	5.0	0.250
8606025962433	60	1000 x 500	8	4.0	0.240
8606025962457	70	1000 x 500	7	3.5	0.245
8606025962471	80	1000 x 500	6	3.0	0.240
8606025962495	90	1000 x 500	5	2.5	0.225
8606025962518	100	1000 x 500	5	2.5	0.250
8606025962532	110	1000 x 500	4	2.0	0.220
8606025962556	120	1000 x 500	4	2.0	0.240
8606025962570	140	1000 x 500	3	1.5	0.210
8606025962594	150	1000 x 500	4	2.0	0.300
8606025962617	160	1000 x 500	3	1.5	0.240
8606025962631	180	1000 x 500	3	1.5	0.270
8606025962648	200	1000 x 500	3	1.5	0.300
8606025962655	220	1000 x 500	3	1.5	0.330
8606025962662	250	1000 x 500	2	1.0	0.250
8606025962679	280	1000 x 500	2	1.0	0.280
8606025962686	500	1000 x 500	1	0.5	0.250

* On special request, boards can also be cut to other thicknesses (e.g. 130 mm, 170 mm, 190 mm etc.)

** On special request, boards can also be cut to other sizes – max. length 5000 mm, max. width 1250 mm

Packing list: Austrotherm EPS A100 boards with stepped (rebated) edges

EAN	thickness * [mm]	size ** [mm]	boards per pack	m² *** per pack	m³ per pack
8606025962402	40	1000 x 500	12	5.73	0.229
8606025962426	50	1000 x 500	10	4.78	0.239
8606025962440	60	1000 x 500	8	3.82	0.229
8606025962464	70	1000 x 500	7	3.34	0.234
8606025962488	80	1000 x 500	6	2.86	0.229
8606025962501	90	1000 x 500	5	2.39	0.215
8606025962525	100	1000 x 500	5	2.39	0.239
8606025962549	110	1000 x 500	4	1.91	0.210
8606025962563	120	1000 x 500	4	1.91	0.229
8606025962587	140	1000 x 500	3	1.43	0.201
8606025962600	150	1000 x 500	4	1.91	0.287
8606025962204	160	1000 x 500	3	1.43	0.229
8606025962693	200	1000 x 500	3	1.44	0.286

* On special request, boards can be cut to other thicknesses of up to 300 mm

** On special request, boards can also be cut to other sizes – max. length 5000 mm, max. width 1250 mm

*** Net board area: one board covers exactly 0.4777 m²

Indicative calculation

How many packs?

Packs from our own packing lists: area ÷ m² per pack, rounded up. With a target U-value the calculator shows the indicative insulation thickness d = λ × R.

Enter the area to see the number of packs.

Indicative only — the final choice and thickness are confirmed by your designer or Austrotherm technical support. The thickness estimate takes the insulation layer alone (R = 1/U) and does not check any regulation.

Find a dealer Ask technical support