Name: Austrotherm EPS A30
Brand: Austrotherm

Application

In the Republic of Serbia: used as a packaging product in the form of boards or cut profiles, as a semi-finished product or as a finished product for other, non-construction purposes.

Outside the Republic of Serbia: used as a construction product, in areas with no compressive load on the insulation layer. The icons below refer to the use of this product outside the Republic of Serbia.

Austrotherm EPS A30

Technical data

As published by Austrotherm d.o.o. Copy the table or print it for your project file.

Cell content	air
Product standard	EN 13163
Category to EN 13163	EPS 30
Colour of the band on the pack	blue
Edges	straight edges / stepped (rebated) edges
Board size	1000mm x 500mm
Net board area	0.50m2 / 0.4777m2
Compressive strength (at 10% deformation)	min. 30 kPa (3 t/m2)
Permitted compressive load (at 2% deformation)	10 kPa (1 t/m2)
Thermal conductivity (λ)	0.044 W/mK
Reaction to fire class	E

Austrotherm EPS A30

Packaging

Thicknesses, board sizes, boards per pack, m² and m³ per pack and the EAN code of each item.

Packing list: Austrotherm EPS A30 boards with straight edges

EAN	thickness * [mm]	size ** [mm]	boards per pack	m² per pack	m³ per pack
8606025960002	10	1000 x 500	50	25.0	0.250
8606025960019	20	1000 x 500	24	12.0	0.240
8606025960026	30	1000 x 500	16	8.0	0.240
8606025960033	40	1000 x 500	12	6.0	0.240
8606025960057	50	1000 x 500	10	5.0	0.250
8606025960071	60	1000 x 500	8	4.0	0.240
8606025960095	70	1000 x 500	7	3.5	0.245
8606025960118	80	1000 x 500	6	3.0	0.240
8606025960132	90	1000 x 500	5	2.5	0.225
8606025960156	100	1000 x 500	5	2.5	0.250
8606025960170	110	1000 x 500	4	2.0	0.220
8606025960194	120	1000 x 500	4	2.0	0.240
8606025960217	140	1000 x 500	4	2.0	0.280
8606025960316	150	1000 x 500	4	2.0	0.300
8606025960248	160	1000 x 500	3	1.5	0.240
8606025960262	180	1000 x 500	3	1.5	0.270
8606025960279	200	1000 x 500	3	1.5	0.300
8606025960286	220	1000 x 500	2	1.0	0.220
8606025960293	250	1000 x 500	2	1.0	0.250
8606025960309	300	1000 x 500	1	1.0	0.300

* On special request, boards can also be cut to other thicknesses (e.g. 130 mm, 170 mm etc.)

** On special request, boards can also be cut to other sizes – max. length 5000 mm, max. width 1250 mm

Packing list: Austrotherm EPS A30 boards with stepped (rebated) edges

EAN	thickness * [mm]	size ** [mm]	boards per pack	m² *** per pack	m³ per pack
8606025960040	40	1000 x 500	12	5.73	0.229
8606025960064	50	1000 x 500	10	4.78	0.239
8606025960088	60	1000 x 500	8	3.82	0.229
8606025960101	70	1000 x 500	7	3.34	0.234
8606025960125	80	1000 x 500	6	2.86	0.229
8606025960149	90	1000 x 500	5	2.39	0.215
8606025960163	100	1000 x 500	5	2.39	0.239
8606025960187	110	1000 x 500	4	1.91	0.210
8606025960200	120	1000 x 500	4	1.91	0.229
8606025960224	140	1000 x 500	3	1.43	0.201
8606025960231	150	1000 x 500	4	1.91	0.287
8606025960255	160	1000 x 500	3	1.43	0.229
8606025960323	200	1000 x 500	3	1.43	0.286

* On special request, boards can be cut to thicknesses of up to 300 mm

** On special request, boards can also be cut to other sizes – max. length 5000 mm, max. width 1250 mm

*** Net board area: one board covers exactly 0.4777 m²

Indicative calculation

How many packs?

Packs from our own packing lists: area ÷ m² per pack, rounded up. With a target U-value the calculator shows the indicative insulation thickness d = λ × R.

Enter the area to see the number of packs.

Indicative only — the final choice and thickness are confirmed by your designer or Austrotherm technical support. The thickness estimate takes the insulation layer alone (R = 1/U) and does not check any regulation.

Find a dealer Ask technical support