Name: Austrotherm EPS A120
Brand: Austrotherm

Application

In areas with higher compressive loads on the insulation layer (under the screed of floor build-ups, on flat roofs used by people but not by vehicles and machines).

Austrotherm EPS A120

Technical data

As published by Austrotherm d.o.o. Copy the table or print it for your project file.

Cell content	air
Product standard	EN 13163
Category to EN 13163	EPS 120
Colour of the band on the pack	black
Edges	straight edges / stepped (rebated) edges
Board size	1000mm x 500mm
Net board area	0.50m2 / 0.4777m2
Compressive strength (at 10% deformation)	min. 120 kPa (12 t/m2)
Permitted compressive load (at 2% deformation)	30 kPa (3 t/m2)
Thermal conductivity (λ)	0.034 W/mK
Reaction to fire class	E

Austrotherm EPS A120

Packaging

Thicknesses, board sizes, boards per pack, m² and m³ per pack and the EAN code of each item.

Packing list: Austrotherm EPS A120 boards with straight edges

EAN	thickness * [mm]	size ** [mm]	boards per pack	m² per pack	m³ per pack
8606025963331	10	1000 x 500	50	25.0	0.250
8606025963348	20	1000 x 500	24	12.0	0.240
8606025963355	30	1000 x 500	16	8.0	0.240
8606025963362	40	1000 x 500	12	6.0	0.240
8606025963386	50	1000 x 500	10	5.0	0.250
8606025963408	60	1000 x 500	8	4.0	0.240
8606025963423	70	1000 x 500	7	3.5	0.245
8606025963447	80	1000 x 500	6	3.0	0.240
8606025963461	90	1000 x 500	5	2.5	0.225
8606025963485	100	1000 x 500	5	2.5	0.250
8606025963508	110	1000 x 500	4	2.0	0.220
8606025963522	120	1000 x 500	4	2.0	0.240
8606025963546	140	1000 x 500	3	1.5	0.210
8606025963768	150	1000 x 500	4	2.0	0.300
8606025963577	160	1000 x 500	3	1.5	0.240
8606025963591	180	1000 x 500	3	1.5	0.270
8606025963607	200	1000 x 500	3	1.5	0.300
8606025963614	220	1000 x 500	2	1.0	0.220
8606025963621	240	1000 x 500	2	1.0	0.240
8606025963782	250	1000 x 500	2	1.0	0.250
8606025963638	260	1000 x 500	2	1.0	0.260
8606025963645	280	1000 x 500	2	1.0	0.280
8606025963652	300	1000 x 500	2	1.0	0.300
8606025963669	320	1000 x 500	1	0.5	0.160
8606025963676	340	1000 x 500	1	0.5	0.170
8606025963683	360	1000 x 500	1	0.5	0.180
8606025963690	380	1000 x 500	1	0.5	0.190
8606025963706	400	1000 x 500	1	0.5	0.200
8606025963713	420	1000 x 500	1	0.5	0.210
8606025963720	440	1000 x 500	1	0.5	0.220
8606025963737	460	1000 x 500	1	0.5	0.230
8606025963744	480	1000 x 500	1	0.5	0.240
8606025963751	500	1000 x 500	1	0.5	0.250

* On special request, boards can also be cut to other thicknesses (e.g. 130 mm, 170 mm, 190 mm etc.)

** On special request, boards can also be cut to other sizes – max. length 5000 mm, max. width 1250 mm

Packing list: Austrotherm EPS A120 boards with stepped (rebated) edges

EAN	thickness * [mm]	size ** [mm]	boards per pack	m² *** per pack	m³ per pack
8606025963379	40	1000 x 500	12	5.73	0.229
8606025963393	50	1000 x 500	10	4.78	0.239
8606025963416	60	1000 x 500	8	3.82	0.229
8606025963430	70	1000 x 500	7	3.34	0.234
8606025963454	80	1000 x 500	6	2.86	0.229
8606025963478	90	1000 x 500	5	2.39	0.215
8606025963492	100	1000 x 500	5	2.39	0.239
8606025963515	110	1000 x 500	4	1.91	0.210
8606025963539	120	1000 x 500	4	1.91	0.229
8606025963553	140	1000 x 500	3	1.43	0.201
8606025963560	150	1000 x 500	4	1.91	0.287
8606025963584	160	1000 x 500	3	1.43	0.229
8606025963775	200	1000 x 500	3	1.44	0.286

* On special request, boards can be cut to other thicknesses of up to 300 mm

** On special request, boards can also be cut to other sizes – max. length 5000 mm, max. width 1250 mm

*** Net board area: one board covers exactly 0.4777 m²

Indicative calculation

How many packs?

Packs from our own packing lists: area ÷ m² per pack, rounded up. With a target U-value the calculator shows the indicative insulation thickness d = λ × R.

Enter the area to see the number of packs.

Indicative only — the final choice and thickness are confirmed by your designer or Austrotherm technical support. The thickness estimate takes the insulation layer alone (R = 1/U) and does not check any regulation.

Find a dealer Ask technical support