Name: Austrotherm EPS A150
Brand: Austrotherm

Application

In areas with high compressive loads on the insulation layer (under the screed of floor build-ups, on flat roofs, on pitched roofs above the rafters).

Austrotherm EPS A150

Technical data

As published by Austrotherm d.o.o. Copy the table or print it for your project file.

Cell content	air
Product standard	EN 13163
Category to EN 13163	EPS 150
Colour of the band on the pack	2 x black
Edges	straight edges / stepped (rebated) edges
Board size	1000mm x 500mm
Net board area	0.50m2 / 0.4777m2
Compressive strength (at 10% deformation)	min. 150 kPa (15 t/m2)
Permitted compressive load (at 2% deformation)	40 kPa (4 t/m2)
Thermal conductivity (λ)	0.033 W/mK
Reaction to fire class	E

Austrotherm EPS A150

Packaging

Thicknesses, board sizes, boards per pack, m² and m³ per pack and the EAN code of each item.

Packing list: Austrotherm EPS A150 boards with straight edges

EAN	thickness * [mm]	size ** [mm]	boards per pack	m² per pack	m³ per pack
8606025963904	10	1000 x 500	50	25.0	0.250
8606025963911	20	1000 x 500	24	12.0	0.240
8606025963928	30	1000 x 500	16	8.0	0.240
8606025963935	40	1000 x 500	12	6.0	0.240
8606025963959	50	1000 x 500	10	5.0	0.250
8606025963973	60	1000 x 500	8	4.0	0.240
8606025963997	70	1000 x 500	7	3.5	0.245
8606025964017	80	1000 x 500	6	3.0	0.240
8606025964031	90	1000 x 500	5	2.5	0.225
8606025964055	100	1000 x 500	5	2.5	0.250
8606025964079	110	1000 x 500	4	2.0	0.220
8606025964093	120	1000 x 500	4	2.0	0.240
8606025964116	140	1000 x 500	3	1.5	0.210
8606025964284	150	1000 x 500	4	2.0	0.300
8606025964147	160	1000 x 500	3	1.5	0.240
8606025964161	180	1000 x 500	3	1.5	0.270
8606025964178	200	1000 x 500	3	1.5	0.300
8606025964185	220	1000 x 500	2	1.0	0.220
8606025964192	240	1000 x 500	2	1.0	0.240
8606025964208	260	1000 x 500	2	1.0	0.260
8606025964215	280	1000 x 500	2	1.0	0.280
8606025964222	300	1000 x 500	2	1.0	0.300
8606025964239	340	1000 x 500	1	0.5	0.170
8606025964246	360	1000 x 500	1	0.5	0.180
8606025964253	400	1000 x 500	1	0.5	0.200
8606025964260	440	1000 x 500	1	0.5	0.220
8606025964277	500	1000 x 500	1	0.5	0.250

* On special request, boards can also be cut to other thicknesses (e.g. 130 mm, 170 mm, 190 mm etc.)

** On special request, boards can also be cut to other sizes – max. length 5000 mm, max. width 1250 mm.

Packing list: Austrotherm EPS A150 boards with stepped (rebated) edges

EAN	thickness * [mm]	size ** [mm]	boards per pack	m² *** per pack	m³ per pack
8606025963942	40	1000 x 500	12	5.73	0.229
8606025963966	50	1000 x 500	10	4.78	0.239
8606025963980	60	1000 x 500	8	3.82	0.229
8606025964000	70	1000 x 500	7	3.34	0.234
8606025964024	80	1000 x 500	6	2.86	0.229
8606025964048	90	1000 x 500	5	2.39	0.215
8606025964062	100	1000 x 500	5	2.39	0.239
8606025964086	110	1000 x 500	4	1.91	0.210
8606025964093	120	1000 x 500	4	1.91	0.229
8606025964123	140	1000 x 500	3	1.43	0.201
8606025964130	150	1000 x 500	4	1.91	0.287
8606025964154	160	1000 x 500	3	1.43	0.229
8606025964291	200	1000 x 500	3	1.43	0.286

* On special request, boards can be cut to other thicknesses of up to 300 mm

** On special request, boards can also be cut to other sizes – max. length 5000 mm, max. width 1250 mm

*** Net board area: one board covers exactly 0.4777 m²

Indicative calculation

How many packs?

Packs from our own packing lists: area ÷ m² per pack, rounded up. With a target U-value the calculator shows the indicative insulation thickness d = λ × R.

Enter the area to see the number of packs.

Indicative only — the final choice and thickness are confirmed by your designer or Austrotherm technical support. The thickness estimate takes the insulation layer alone (R = 1/U) and does not check any regulation.

Find a dealer Ask technical support